pellvac system components and products
Suction pot
20 litres with counter-weight flap valve for discharge into a boiler-room store. Swiveling hose connections. Adjustable roof console.
Suction pot
20 litres with a short, burner controlled feeding snail-screw. Adjustable roof console and swiveling hose connections. The snail-screw to be connected to the burner inlet with a short hose. Spacesaving.
Sluice
Suction pot 10 litres with counter weight flap valve. Discharges into a 12 litres storing pot supplied with a burner controlled feeding snail-screw. Spacesaving. Suits all types of burners.
Total height ca 1000 mm.
Capacitive level sensor
Controls the automatic system via the PLC electronic control box.
Central vacuum cleaner
about 1500 W.
We always use standard equipment of known trade marks.
PLC-box
Wall-mounted
with all accessories built in.
Antistatic conveying hose
Ø 50 mm. Shortest bend radius: 0,5 m. Avoid unnessessary bends. Underground installation in culvert pipe.
Feeding snail-screw
to be connected underneath a bulk pellets silo. Controls the mixing of of air and pellets into the conveying hose (about 3 kg/min).Controlled feeding capacity makes it possible to convey pellets up to 100 metres. Motor and snail-screw are mounted as a one piece plug-in kit. A sliding lid shuts off the bulksilo.
Pre-separator
To be mounted between the central vacuum cleaner and the suction pot for high efficiency separation (99%) of pellets dust and crumbs.
Three-way valve
Manual or automatic three-way valve that divides the suction to:
- tranportation of pellets from storage to boiler room
- cleaning out ashes in the boiler
- household cleaning